UDP connection over Internet

[Vassiliev]

Hello,

I am trying to send video stream from my Raspberry Pi to PC using UDP protocol. RPi and PC connected to same Wi-FI network with static IP 77.87.xxx.xx

On RPi:
gst-launch-1.0 -v rpicamsrc preview=0 bitrate=1000000 ! video/x-h264, width=1280, height=720, framerate=25/1, profile=high ! h264parse ! rtph264pay config-interval=1 pt=96 ! udpsink host=77.87.xxx.xx port=5000

On PC:
gst-launch-1.0 -v udpsrc port=5000 ! application/x-rtp, encoding-name=H264, payload=96 ! rtph264depay ! avdec_h264 ! autovideosink sync=false

Also on router (Zyxel Viva) I created a NAT rule:


With such setup I cant get anything, while with host=192.168.1.5 it works correct.
Where is the problem?

Thanks

[nar6du14]

My knowledge about IP network is a little old but I will

give some suggestions.

Your 2 devices are not in the same IP network(differents IP

address) do you have a router between them?

Le Dimanche 10 avril 2016 15h27, Vassiliev <[hidden email]> a écrit :

Hello,

I am trying to send video stream from my Raspberry Pi to PC using UDP
protocol. RPi and PC connected to same Wi-FI network with static IP
77.87.xxx.xx

On RPi:
gst-launch-1.0 -v rpicamsrc preview=0 bitrate=1000000 ! video/x-h264,
width=1280, height=720, framerate=25/1, profile=high ! h264parse !
rtph264pay config-interval=1 pt=96 ! udpsink host=77.87.xxx.xx port=5000

On PC:
gst-launch-1.0 -v udpsrc port=5000 ! application/x-rtp, encoding-name=H264,
payload=96 ! rtph264depay ! avdec_h264 ! autovideosink sync=false

Also on router (Zyxel Viva) I created a NAT rule:
<http://gstreamer-devel.966125.n4.nabble.com/file/n4676807/nat.png>

With such setup I cant get anything, while with host=192.168.1.5 it works
correct.
Where is the problem?

Thanks



--
View this message in context: http://gstreamer-devel.966125.n4.nabble.com/UDP-connection-over-Internet-tp4676807.html
Sent from the GStreamer-devel mailing list archive at Nabble.com.
_______________________________________________
gstreamer-devel mailing list
[hidden email]
https://lists.freedesktop.org/mailman/listinfo/gstreamer-devel

_______________________________________________
gstreamer-devel mailing list
[hidden email]
https://lists.freedesktop.org/mailman/listinfo/gstreamer-devel

[Vassiliev]

They connected to one router and have same IP

[nar6du14]

Hm your rabs is 77.xx.xx.xx and your pc 192.xx.xx.xx there are not

in the same IP network. Give a 192.xx.xx.xxto your rabs first an see

what's happen

Le Dimanche 10 avril 2016 15h27, Vassiliev <[hidden email]> a écrit :

Hello,

I am trying to send video stream from my Raspberry Pi to PC using UDP
protocol. RPi and PC connected to same Wi-FI network with static IP
77.87.xxx.xx

On RPi:
gst-launch-1.0 -v rpicamsrc preview=0 bitrate=1000000 ! video/x-h264,
width=1280, height=720, framerate=25/1, profile=high ! h264parse !
rtph264pay config-interval=1 pt=96 ! udpsink host=77.87.xxx.xx port=5000

On PC:
gst-launch-1.0 -v udpsrc port=5000 ! application/x-rtp, encoding-name=H264,
payload=96 ! rtph264depay ! avdec_h264 ! autovideosink sync=false

Also on router (Zyxel Viva) I created a NAT rule:
<http://gstreamer-devel.966125.n4.nabble.com/file/n4676807/nat.png>

With such setup I cant get anything, while with host=192.168.1.5 it works
correct.
Where is the problem?

Thanks



--
View this message in context: http://gstreamer-devel.966125.n4.nabble.com/UDP-connection-over-Internet-tp4676807.html
Sent from the GStreamer-devel mailing list archive at Nabble.com.
_______________________________________________
gstreamer-devel mailing list
[hidden email]
https://lists.freedesktop.org/mailman/listinfo/gstreamer-devel

_______________________________________________
gstreamer-devel mailing list
[hidden email]
https://lists.freedesktop.org/mailman/listinfo/gstreamer-devel

[Vassiliev]

77.87.xxx.xx - my router's global IP, so all devices connected to it have the same global IP.
Now RPi and PC connected to this router and I want stream video from RPi to PC throw the Internet, so later I can connect RPi to another network.
192.168.1.5 - PC's LOCAL IP and 192.168.1.12 - RPi's local IP. And I already made streaming from 192.168.1.12 to 192.168.1.5 in local network.
Now I want to stream from yy.yy.yyy.yy - which is RPi's possible IP (now it is 77.87.xxx.xx) to 77.87.xxx.xx which is my PC's IP also.

narcisse doudieu siewe wrote

Hm your rabs is 77.xx.xx.xx and your pc 192.xx.xx.xx there are notin the same IP network. Give a 192.xx.xx.xxto your rabs first an seewhat's happen

 

    Le Dimanche 10 avril 2016 15h27, Vassiliev <[hidden email]> a écrit :
 

 Hello,

I am trying to send video stream from my Raspberry Pi to PC using UDP
protocol. RPi and PC connected to same Wi-FI network with static IP
77.87.xxx.xx

On RPi:
gst-launch-1.0 -v rpicamsrc preview=0 bitrate=1000000 ! video/x-h264,
width=1280, height=720, framerate=25/1, profile=high ! h264parse !
rtph264pay config-interval=1 pt=96 ! udpsink host=77.87.xxx.xx port=5000

On PC:
gst-launch-1.0 -v udpsrc port=5000 ! application/x-rtp, encoding-name=H264,
payload=96 ! rtph264depay ! avdec_h264 ! autovideosink sync=false

Also on router (Zyxel Viva) I created a NAT rule:
<http://gstreamer-devel.966125.n4.nabble.com/file/n4676807/nat.png> 

With such setup I cant get anything, while with host=192.168.1.5 it works
correct.
Where is the problem?

Thanks



--
View this message in context: http://gstreamer-devel.966125.n4.nabble.com/UDP-connection-over-Internet-tp4676807.html
Sent from the GStreamer-devel mailing list archive at Nabble.com.
_______________________________________________
gstreamer-devel mailing list
[hidden email]
https://lists.freedesktop.org/mailman/listinfo/gstreamer-devel



_______________________________________________
gstreamer-devel mailing list
[hidden email]
https://lists.freedesktop.org/mailman/listinfo/gstreamer-devel

[nar6du14]

Ok, did you know about port forwarding?

configure a port forwarding to transfert the traffic on router 

's port 5000 to your pc at IP 192.168.1.5 at port 5000

Le Lundi 11 avril 2016 13h09, Vassiliev <[hidden email]> a écrit :

77.87.xxx.xx - my router's global IP, so all devices connected to it have the
same global IP.
Now RPi and PC connected to this router and I want stream video from RPi to
PC throw the Internet, so later I can connect RPi to another network.
192.168.1.5 - PC's LOCAL IP and 192.168.1.12 - RPi's local IP. And I already
made streaming from 192.168.1.12 to 192.168.1.5 in local network.
Now I want to stream from yy.yy.yyy.yy - which is RPi's possible IP (now it
is 77.87.xxx.xx) to 77.87.xxx.xx which is my PC's IP also.



narcisse doudieu siewe wrote
> Hm your rabs is 77.xx.xx.xx and your pc 192.xx.xx.xx there are notin the
> same IP network. Give a 192.xx.xx.xxto your rabs first an seewhat's happen
>
> 
>
>    Le Dimanche 10 avril 2016 15h27, Vassiliev &lt;

> Valera.Vassiliev@

> &gt; a écrit :
> 
>
>  Hello,
>
> I am trying to send video stream from my Raspberry Pi to PC using UDP
> protocol. RPi and PC connected to same Wi-FI network with static IP
> 77.87.xxx.xx
>
> On RPi:
> gst-launch-1.0 -v rpicamsrc preview=0 bitrate=1000000 ! video/x-h264,
> width=1280, height=720, framerate=25/1, profile=high ! h264parse !
> rtph264pay config-interval=1 pt=96 ! udpsink host=77.87.xxx.xx port=5000
>
> On PC:
> gst-launch-1.0 -v udpsrc port=5000 ! application/x-rtp,
> encoding-name=H264,
> payload=96 ! rtph264depay ! avdec_h264 ! autovideosink sync=false
>
> Also on router (Zyxel Viva) I created a NAT rule:
> &lt;http://gstreamer-devel.966125.n4.nabble.com/file/n4676807/nat.png>
>
> With such setup I cant get anything, while with host=192.168.1.5 it works
> correct.
> Where is the problem?
>
> Thanks
>
>
>
> --
> View this message in context:
> http://gstreamer-devel.966125.n4.nabble.com/UDP-connection-over-Internet-tp4676807.html
> Sent from the GStreamer-devel mailing list archive at Nabble.com.
> _______________________________________________
> gstreamer-devel mailing list

> [hidden email]

> https://lists.freedesktop.org/mailman/listinfo/gstreamer-devel
>
>
>
> _______________________________________________
> gstreamer-devel mailing list

> [hidden email]

> https://lists.freedesktop.org/mailman/listinfo/gstreamer-devel





--
View this message in context: http://gstreamer-devel.966125.n4.nabble.com/UDP-connection-over-Internet-tp4676807p4676828.html

Sent from the GStreamer-devel mailing list archive at Nabble.com.
_______________________________________________
gstreamer-devel mailing list
[hidden email]
https://lists.freedesktop.org/mailman/listinfo/gstreamer-devel

_______________________________________________
gstreamer-devel mailing list
[hidden email]
https://lists.freedesktop.org/mailman/listinfo/gstreamer-devel