GStreamer core error in banshee: StateChange

classic Classic list List threaded Threaded
5 messages Options
Reply | Threaded
Open this post in threaded view
|

GStreamer core error in banshee: StateChange

Klaus Zeitler-5
Hello,
all of a sudden I can't play music anymore. Instead banshee spits out hundreds
of the following 2 error messages:

GStreamer core error: StateChange
GStreamer resource error: NotFound

Not very informative I'd say.
Maybe somebody here has got an idea what happened or can point me towards the
right place to ask (if this isn't the right one :-).

My problem started after I had installed sound-juicer (somebody suggested to
use sound-juicer to rip the CDs, since I just can't get banshee to fetch
metadata). I installed sound-juicer and ripped 2 CDs (without any problems) and
also played a CD. But next time I called banshee I got those odd GStreamer
errors and now I also get them when I try to play music with sound-juicer.
But then again that might be pure coincidence.

Nevertheless I de-installed sound-juicer, but the errors didn't disappear for
banshee.

I'm at a total loss. Maybe I should try to reinstall gstreamer, but there are
so many packages, that I have no idea what I should select. e.g. I see many
gstreamer-0_10... packages as well as gstreamer010... ones with yast2.
Can/should I install new gstreamer packages and if so which ones?

OS: openSuse 10.3

BTW I also submitted a bug report for gstreamer.

I appreciate any help.

Thanks

Klaus

--
 -------------------------------------------------------
|  Klaus Zeitler                                        |
|  Raiffeisenstr. 31 a     90427 Nürnberg     Germany   |
|  Telefon:           49 911 316261      Fax:  316281   |
|  Email:             [hidden email]              |
 -------------------------------------------------------
---
Illegal aliens have always been a problem in the United States.
Ask any Indian.                                 -- Robert Orben

-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
gstreamer-devel mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/gstreamer-devel
Reply | Threaded
Open this post in threaded view
|

Re: GStreamer core error in banshee: StateChange

Stefan Sauer
hi,

Klaus Zeitler schrieb:

> Hello,
> all of a sudden I can't play music anymore. Instead banshee spits out hundreds
> of the following 2 error messages:
>
> GStreamer core error: StateChange
> GStreamer resource error: NotFound
>
> Not very informative I'd say.
> Maybe somebody here has got an idea what happened or can point me towards the
> right place to ask (if this isn't the right one :-).
 >
Try running banshee from commandline like:
GST_DEBUG="*:3" banshee

Also please check gstreamer-properties if for some reason your preferred
audiosink is invalid.

You could also check other gstreamer based apps like totem.

Stefan

>
> My problem started after I had installed sound-juicer (somebody suggested to
> use sound-juicer to rip the CDs, since I just can't get banshee to fetch
> metadata). I installed sound-juicer and ripped 2 CDs (without any problems) and
> also played a CD. But next time I called banshee I got those odd GStreamer
> errors and now I also get them when I try to play music with sound-juicer.
> But then again that might be pure coincidence.
>
> Nevertheless I de-installed sound-juicer, but the errors didn't disappear for
> banshee.
>
> I'm at a total loss. Maybe I should try to reinstall gstreamer, but there are
> so many packages, that I have no idea what I should select. e.g. I see many
> gstreamer-0_10... packages as well as gstreamer010... ones with yast2.
> Can/should I install new gstreamer packages and if so which ones?
>
> OS: openSuse 10.3
>
> BTW I also submitted a bug report for gstreamer.
>
> I appreciate any help.
>
> Thanks
>
> Klaus
>


-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
gstreamer-devel mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/gstreamer-devel
Reply | Threaded
Open this post in threaded view
|

Re: GStreamer core error in banshee: StateChange

Klaus Zeitler-5
>>>>> "Stefan" == Stefan Kost <[hidden email]> writes:
    Stefan>
    Stefan> Try running banshee from commandline like:
    Stefan> GST_DEBUG="*:3" banshee
    Stefan>
    Stefan> Also please check gstreamer-properties if for some reason your
    Stefan> preferred  audiosink is invalid.

gstreamer-properties shows:
Audio output: Autodetect
Audio input: ALSA

BTW when I start gstreamer-properties I get
gstreamer-properties-Message: Skipping unavailable plugin 'artsdsink'
gstreamer-properties-Message: Skipping unavailable plugin 'pulsesink'
gstreamer-properties-Message: Skipping unavailable plugin 'sdlvideosink'
gstreamer-properties-Message: Skipping unavailable plugin 'v4lmjpegsrc'
gstreamer-properties-Message: Skipping unavailable plugin 'qcamsrc'
gstreamer-properties-Message: Skipping unavailable plugin 'v4l2src'
gstreamer-properties-Message: Skipping unavailable plugin 'esdmon'
gstreamer-properties-Message: Skipping unavailable plugin 'pulsesrc'

Is that normal?

    Stefan> You could also check other gstreamer based apps like totem.

That was a good hint. I tried totem, tried to play a FLAC file.
No sound, but no error messages either. Then I started envy24control
to check the sound output and finally I got an error message that
I understood: No ICE1712 cards found

Thus I de-installed and reinstalled my sound card and voila everything
works just fine now. I have no idea what messed up the sound configuration.

Nevertheless banshee and sound-juicer could do better than spitting out
those 2 error messages I mentioned in my first mail thousands of times in
such a case.

Thanks a lot for your help

Klaus

--
 -------------------------------------------------------
|  Klaus Zeitler                                        |
|  Raiffeisenstr. 31 a     90427 Nürnberg     Germany   |
|  Telefon:           49 911 316261      Fax:  316281   |
|  Email:             [hidden email]              |
 -------------------------------------------------------
---
Christian Fundamentalism: The doctrine that there is an absolutely
powerful, infinitely knowledgeable, universe spanning entity that is
deeply and personally concerned about my sex life.

-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
gstreamer-devel mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/gstreamer-devel
Reply | Threaded
Open this post in threaded view
|

Re: GStreamer core error in banshee: StateChange

Stefan Sauer
Klaus Zeitler schrieb:

>>>>>> "Stefan" == Stefan Kost <[hidden email]> writes:
>     Stefan>
>     Stefan> Try running banshee from commandline like:
>     Stefan> GST_DEBUG="*:3" banshee
>     Stefan>
>     Stefan> Also please check gstreamer-properties if for some reason your
>     Stefan> preferred  audiosink is invalid.
>
> gstreamer-properties shows:
> Audio output: Autodetect
> Audio input: ALSA
>
> BTW when I start gstreamer-properties I get
> gstreamer-properties-Message: Skipping unavailable plugin 'artsdsink'
> gstreamer-properties-Message: Skipping unavailable plugin 'pulsesink'
> gstreamer-properties-Message: Skipping unavailable plugin 'sdlvideosink'
> gstreamer-properties-Message: Skipping unavailable plugin 'v4lmjpegsrc'
> gstreamer-properties-Message: Skipping unavailable plugin 'qcamsrc'
> gstreamer-properties-Message: Skipping unavailable plugin 'v4l2src'
> gstreamer-properties-Message: Skipping unavailable plugin 'esdmon'
> gstreamer-properties-Message: Skipping unavailable plugin 'pulsesrc'
>
> Is that normal?
>
>     Stefan> You could also check other gstreamer based apps like totem.
>
> That was a good hint. I tried totem, tried to play a FLAC file.
> No sound, but no error messages either. Then I started envy24control
> to check the sound output and finally I got an error message that
> I understood: No ICE1712 cards found
>
> Thus I de-installed and reinstalled my sound card and voila everything
> works just fine now. I have no idea what messed up the sound configuration.
>
> Nevertheless banshee and sound-juicer could do better than spitting out
> those 2 error messages I mentioned in my first mail thousands of times in
> such a case.
>
> Thanks a lot for your help
>
> Klaus
>

Godd that you got it fixed. Feel free to add bug reports for banshee and
soundjuicer. Error reporting is probably always a weak point in software.

Stefan

-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
gstreamer-devel mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/gstreamer-devel
Reply | Threaded
Open this post in threaded view
|

Query : ASF streaming on client WMP player.

Irfan Shaikh-2
In reply to this post by Klaus Zeitler-5
Hi All,

        I tried streaming a file in ASF file format using gstreamer to a client pc
having wmp player.
        I hav tried various pipelines to stream asf file format using gst-launch.

        Finally after trying a lot, i am unable to find elements in GStreamer to
implement a pipeline to stream a
        asf file on WMP player on client PC.

        Can you guys share information regarding my query. Do i need to write a
plugin to achieve this.
        I am pretty unclear about it.I would be very thankful if you look into my
problem.And suggest me different possible alternatives.

Regards,
Irfan.


The information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain proprietary, confidential or privileged information. If you are not the intended recipient, you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately and destroy all copies of this message and any attachments contained in it.

-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
gstreamer-devel mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/gstreamer-devel